Unpacking The Motherboard - SOYO SY-P4IS2 User Manual

Mpga socket 478 processor supported intel i845 agp/pci/cnr 400 mhz front side bus supported atx form factor

Hide thumbs Also See for SY-P4IS2:

Table of Contents

Hardware Installation

2-2 UNPACKING THE MOTHERBOARD

When unpacking the Motherboard, check for the following items:

u The SY-P4IS2 Intel i845 AGP/PCI/CNR Motherboard

u The Quick Start Guide

u The Installation CD-ROM

u SOYO Bonus Pack CD-ROM

u One IDE Device ATA 100 Flat Cable

u One Floppy Disk Drive Flat Cable

u One Heat Sink Compound

Warning: Do not unpack the Motherboard from its anti-static

packaging until you are ready to install it.

Like most electronic equipment, your Motherboard may be damaged by

electrostatic discharge. To avoid permanent damage to components ground

yourself while working by using a grounding strap. Otherwise, ground

yourself frequently by touching the unpainted portion of the computer chassis

to drain the static charges.

Handle the Motherboard carefully, holding it by the edges. You are now ready

to start the installation.

SY-P4IS2

Table of Contents