SOYO SY-P4IS2 User Manual page 71

BIOS Setup Utility
The following tables describe each field in the INTEGRATED
PERIPHERALS Menu and provide instructions on how to configure the
IDE controls, FDC controls, and the onboard serial and parallel ports.
3-5.1 IDE Device Controls
IDE Controls
On-Chip PCI IDE
Ø Primary
Ø Secondary
IDE
Ø
Primary Master PIO
Ø
Primary Slave PIO
Ø
Secondary Master PIO
Ø
Secondary Slave PIO
IDE
Ø Primary Master UDMA
Ø Primary Slave UDMA
Ø Secondary Master UDMA
Ø Secondary Slave UDMA
3-5.2 Keyboard Controls
Keyboard Controls Setting
USB Controller
USB Keyboard
Support
Init Display First
Setting
Disabled
Enabled
mode 0-4
Auto
Disabled
Auto
Description
Disabled
Enabled Select Enabled if your system
contains a Universal Serial Bus
(USB) controller and you have
USB peripherals.
Disabled Turn off the on-board IDE
Enabled Use a USB keyboard
PCI Slot Choose which card – AGP
Display card or PCI VGA card –
AGP
to initialize first.
67
Description
Turn off the on-board
IDE
Use the on-board IDE
0 is the slowest speed
4 is the fastest speed
For better performance
and stability, we suggest
you use the Auto setting
to set the HDD control
timing.
Select Auto to enable
Ultra DMA Mode
support.
SY-P4IS2
Note
Default
Default
Default
Note
Default
Default
Default