Table of Contents
Advertisement
BIOS Setup Utility
3.
Enter your new password and press [Enter]. The following
message appears, prompting to confirm the new password:
4.
Re-enter your password and then press [Enter] to exit to the
Main Menu.
This diagram outlines the password selection procedure:
Type the Password
Type the Password
↔
and Press: <Enter>
Press:
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
Enter Password:
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
Confirm Password:
LOAD SETUP DEFAULTS
LOAD BIOS DEFAULTS
Esc
: Quit
F10
: Save & Exit Setup
3-10 USER PASSWORD
When the user password option is on, you are not allowed to change
any setting in the [CMOS SETUP UTILITY] except for changing the
user's password.
The password setting procedure is similar to that for the
[SUPERVISOR PASSWORD] (Refer to section 3-9).
Confirm Password:
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Enter Password:
∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗
After you confirm the password,
After you confirm the
press <Esc> to exit
password, press
Time, Date, Hard Disk Type...
62
↔
Press <Enter> without
Press:
entering the password
Without entering password
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
Password Disabled!!
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
↑ ↓ → ←
: Select Item
°
(Shift) F2
: Change Color
to exit
SY-D6IBA
Advertisement
Table of Contents
