Lopi Northfield GS Owner's Manual page 58

Optional Equipment
58
20 Attach the receiver to the control panel with the two #8 machine screws (Figure 31).
21 Re-attach the bottom plate to stove, taking care to prevent any wiring from being pinched (see Figure
32). Use the included wire ties, if necessary, to keep all wiring from contacting any hot or moving
components.
22 Place batteries into the receiver and transmitter (see Figure 33). Calibrate the receiver to the
transmitter (see Figure 34 - use a paperclip to press the "PRG" button, let it beep, then press any
button on the transmitter – the receiver should beep 5 times – see the operating instructions for
further details).
© Travis Industries
(for qualified installers only)
Figure 33
4091120
Figure 31
Figure 32
Figure 34
100-01239_000