Lopi Northfield GS Owner's Manual page 56

Optional Equipment
56
15 Place the fan controller on the bottom panel as shown in Figure 23. Make sure the control module is
positioned with the power cord to the right and the module at the back edge of the bottom panel.
16 Attach the power cord from the fan controller to the AC connection (see Figure 24). Attach the
connector labeled "FAN CONTROL" on the wiring harness to the fan control module (see Figure 25).
MAKE SURE TO TURN THE FAN CONTROLLER ON ("-" SYMBOL).
17 Access the back of the stove and disconnect the power lead from accent light (see Figure 26).
Connect the accent light wiring to the power lead included with this kit (see Figure 27).
© Travis Industries
(for qualified installers only)
Figure 24
Figure 26
4091120
Figure 23
Figure 25
Figure 27
100-01239_000