Route Call - Nexus NX2 Installation And Operation Manual

GPS NAVIGATOR
DELETE A LEG
Example; Delete WP 1 27 in LEG 2 without any other effect in the
SAIL PLAN Use PLUS and MINUS buttons for scrolling through the
different LEG's
LEG 2 is first displayed, then distance and bearing;
DELETE WP 1 27 in this LEG by pressing both PLUS and MINUS
buttons simultaneously at the preferred "LEG" location (LEG 02)
BEFORE, WP 003---LEG 2---WP 127---WP024
AFTER, WP 003---LEG 2---WP 024
6.4.2

ROUTE CALL

At least one ROUTE must have been stored to be able to use this
function
This function will ADD a selected ROUTE to the SAIL PLAN in the
same way as it was created It is therefore possible to ADD ON (or
"link") a new ROUTE into the SAIL PLAN as long as the number of
WP's are less then 25
Tip! It is practical to ADD ON a new ROUTE when only 2 or 3 WP's
are remaining in the SAIL PLAN, thus creating a long "seamless"
ROU]T
If you have created a ROUTE and then later change or delete a WP
within that ROUTE, it will be affected
Press SET
"012 flashing", select your ROUTE and press SET
The ROUTE is now ADDED to the SAIL PLAN and you will see the
LEG number briefly, then Distance and Bearing between "FROM"
and "TO" will be displayed
Note! If you are ADDING the ROUTE to another ROUTE, you will
get into the SAIL PLAN's actual LEG number for this Route's first
WP
WARNING!!
35