Nexus NX2 Installation And Operation Manual page 34

GPS NAVIGATOR
Normally, WP 000 (current position/present position) is accepted as
the "START" WP.
Press the PLUS button (LEG 01) and press SET.
The last edited WP is displayed flashing. Use the GENERAL
WAYPOINT SEARCH, chapter 5.11 for finding the first WP to go to
and press SET.
As an Example we choose "BOUY SW" and then press
SET.
Note! Before distance and bearing to the target WP is displayed,
the LEG number is shown.
The distance to "BOUY SW" is 32.34 NM and the bearing is 2340 in
this first LEG.
Press the PLUS button for NEXT LEG;
WP 103 will be the FROM WP for the NEXT LEG (LEG 2).
Press SET, get next WP and press SET.
33