Move Wp; Delete; Ed B/R - Nexus NX2 Installation And Operation Manual

Select the TO WP number for the WP block 012-123 Set this WP
for example "address" to 200 and press SET
DONE!
6.2.4

MOVE WP

MOVE WP
Is the same as COPY with the difference that it will first copy the
selected WP's to the new block position before the original
waypoints will be erased.
6.2.5

DELETE

Deletes a single or a block of WP's by use of the same procedure
as in COPY and MOVE.
Warning ! There is no way back if DELETE is fully executed. But if
you accidentally press the SET, you may ESCAPE without
DELETING with a long press on the PAGE button.
6.2.6

ED B/R

ED B/R (EDIT a WP in Bearing and range from present position).
Note! BEARING and RANGE is ALWAYS in TRUE NORTH from
PRESENT POSITION.
Press SET and FREE is displayed, accept or select an other free
WP number and press SET.
Enter the WP's "NAME" (as described iii chapter 6.2.1) and press
SET.
"WP NAME"(example shows distance 1 2.24 NM and bearing 205
from 1 2.34 205 present position)
28
GPS NAVIGATOR