Nexus NX2 Installation And Operation Manual page 35

GPS NAVIGATOR
Repeat until a maximum of 24 WP's (LEG's) have been included in
the SAIL PLAN.
Also, make it a habit to always VERIFY the Distance and Rearing
for all LEG's in the SAIL PLAN, especially if stored as a ROUTE
Important! You will affect the ROUTE if you change the lat/ long
position for a waypoint that is used within that route.
CLEAR SAIL PLAN.
To clear the complete SAIL PLAN, press CLEAR, PLUS and
MINUS buttons simultaneously when the text SAIL PLAN is
displayed. The display will then show CLEAR PLAN for a short
moment.
INSERT A LEG INTO THE SAIL PLAN.
EXAMPLE. Insert a new leg (WP 1 27) between the present WP
103 and WP 107. This will move WP 107 one LEG minus the
in
SAIL PLAN queue list. Use the PLUS and MINUS buttons for
scrolling through the different LEG's in the SAIL PLAN.
LEG 02 is first displayed, then distance and bearing;
BEFORE,
WP 1O3 ----- LEG 2 ----- WP 107
INSERT of a new LEG by pressing both PLUS and SET buttons
simultaneously at the preferred "LEG INSERT" location.
The text INSERT appears followed by the normal "search" window
where you select WP 127.
AFTER THE INSERT, WP 1O3 ----- LEG 2 ----- WP 127
----- LEG 3 ----- WP 107
34