U
A
SING
CCOUNT
If your telephone system is programmed to use the Station Message Detail Recording
(SMDR) feature, the system will periodically print out a record of telephone calls
placed from the phones within the system. Account codes can be used to add informa-
tion to these reports.
There are three types of account codes:
•
Standard account codes that are entered into the SMDR report automatically
whenever you place a call.
•
Forced account codes that you must dial before being allowed to place an outside
call.
•
Optional account codes that can be entered at any time during a call.
NOTE:
Your customer service representative or System Administrator can tell you
which types of account codes are used on your telephone system.
To enter an optional account code:
Press
1.
Enter the optional account code. If the account code is not immediately accepted,
2.
press
To set an account code for all calls placed from your phone:
Dial
1.
3
Dial the account code. If the account code is not immediately accepted, press
2.
. This code will be used for all calls made from your phone until it is dis-
#
abled.
To disable the code:
Dial
3
9
INT3000 Cordless Telephone User Guide
C
ODES
and dial
spcl
3
9
.
#
1
9
and press
.
1
#
.
9
55