Table of Contents
Advertisement
P
ROGRAMMING
Depending on how your system is programmed, some of your feature keys may be
"user-programmable." If so, you can program them with any of the feature codes
listed in the back of this user guide or with extension numbers. In addition, you can
combine the feature key and Station Speed-Dial functions to program a feature key to
dial an outside number.
To program a user-programmable feature key:
Dial
1.
Press the feature key you want to program.
2.
Dial the feature code you want to store under that key. (Refer to the back of this
3.
guide for default feature codes.)
To return all function keys to their original default values:
Dial
3
To display the current function key values:
Dial
1.
Press the feature key you want displayed.
2.
Press
3.
To program a user-programmable function key as a Station Speed-Dial key:
Dial
1.
Press the feature key you want to change into a Station Speed-Dial key.
2.
Dial
3.
Dial a digit 0-9 when the display asks for a number. This is the station speed-dial
4.
number "location."
NOTE:
the SYS SPD feature key found on some phones. To use the SYS SPD feature
key, see
You can now use the procedure outlined on
Speed-Dial key.
54
Y
F
OUR
EATURE
.
3
7
9
.
5
9
.
3
6
9
to hang up.
talk
.
3
7
9
(default Station Speed Dial feature code).
3
8
2
Station Speed-Dial keys created using this procedure are not the same as
page
52.
K
EYS
page 50
to program and use the Station
INT3000 Cordless Telephone User Guide
Advertisement
Table of Contents
