Installing The Battery Pack In The Handset - Inter-Tel INT3000 User Manual

Installing The Battery Pack In The Handset

Remove the battery cover by pressing the
1.
latch and sliding the cover down and off of
the Handset.
If replacing a battery, remove the old bat-
2.
tery.
Slide the Battery Pack down into the Hand-
3.
set.
Replace the cover and slide it up until it
4.
latches into the Handset.
Charging the Battery Pack Inside the Handset
When the Battery Pack in the Handset is low and needs to
be charged, you will see a LOW message on the display.
Place the Handset in the front slot of the Battery
1.
Charger.
Make sure the CHARGE indicator lights. If the
2.
CHARGE light is not lit, check to see that the AC
Adapter is plugged in, and that the Handset is making
good contact with the Battery Charger contacts.
10
INT3000 Cordless Telephone User Guide