Table of Contents
Advertisement
T
ROUBLESHOOTING
If your INT3000 is not performing to your expectations, please try these simple steps.
If you are still unable to resolve the problems, contact your service representative.
NOTE:
Do not attempt to service this unit yourself. All service must be done by quali-
fied service personnel.
PROBLEM
Charge light will not come
on when Handset is placed
in Battery Charger.
Conversation interrupted fre-
quently.
Warning tone and NO SER-
VICE message.
Handset does not ring.
66
•
Make sure the AC Adapter is plugged into the Battery Charger
and wall outlet.
•
Make sure Handset is properly seated in Battery Charger.
•
Make sure the Battery Pack is properly placed in the Handset.
•
Make sure that the charging contacts on the Handset and Bat-
tery Charger are clean.
•
Make sure that the Base Unit antenna is fully vertical.
•
Move closer to the Base Unit.
•
Check for LOW BAT warning.
Move closer to the Base Unit.
•
Ringer switch may be set in the OFF position.
•
Battery may be weak. Charge the Battery Pack for 8-10 hours.
•
Make sure the Base Unit antenna is fully vertical.
•
The Handset may be too far away from the Base Unit.
POSSIBLE SPLUTIONS
INT3000 Cordless Telephone User Guide
Advertisement
Table of Contents
