Step 5 - Pedal Assembly - Smooth Fitness Sit N Cycle Owner's Manual

A I
SSEMBLY NSTRUCTIONS
S –
TEP 5 Pedal Assembly
a. Note:
 The Right Pedal (10) has an R stamped on the end of the
pedal shaft.
 The Left Pedal (9) has an L stamped on the end of the
pedal shaft.
 Assembling the pedals on the wrong side may cause
damage to the product. The left and right sides are
determined from the back of the seated position on the
product, Please see the diagram in step 5.
CAUTION: THE PEDALS MUST BEASSEMBLED TO THE CORRECT SIDES OR THE UNIT. THEY ARE MARKED L & R
ON THE THREADES PORTION OF THE PEDAL. FAILURE TO FOLLOW THE STEPS BELOW MAY CAUSE DAMAGE.
THE LEFT PEDAL IS REVERSED THREADED AND MUST BE FASTENED IN A COUNTER-CLOCKWISE ROTATION
Step 5. Pedal Assembly - Step a, b, c.
Thread the Left
Pedal (9)
Counter-Clock
wise onto the
left crank
b. Right Pedal Assembly: TURN THE PEDAL SHAFT CLOCKWISE
1. NOTE: the pedal shaft of the Right Pedal (10) has right
handed threads and is turned clockwise into the right crank
arm on the Main Frame (1). Make sure the Right pedal is
completely hand tightened into the right crank arm.
Step 1. Right
pedal- hand
tighten clockwise
Right side
c. Left Pedal Assembly: TURN THE PEDAL SHAFT COUNTER-CLOCKWISE
3. NOTE: the pedal shaft of the Left Pedal (9) has left handed
threads and is turned COUNTER-CLOCKWISE into left crank
arm on the Main Frame (1). Make sure the Left pedal is
completely hand tightened into the Left crank arm.
Pedal Shaft
d. Assembly is now complete; make sure that all parts are fully tightened before you use the equipment.
"
Pedal Shaft
Step 3. Left Pedal-
hand tighten
counter-clockwise
Left side
Step a.
2. Then fully tightened the Right Pedal (10)
using the wrench tool, turning clockwise.
Tighten the Pedal as tight as possible.
Step 2. Use the wrench
to fully tighten
clockwise
4. Then fully tightened the Left Pedal (9) using
the wrench tool, turning counter-clockwise.
Tighten the Pedal as tight as possible.
Left side
7
Note: At the
end of pedal
shaft are
stamped R
and L for
Right and left
Thread the
Right Pedal
(10) Clockwise
onto the right
crank
Wrench tool
Right side
Step 4.
Use the wrench
to fully tighten
counter-clockwise