Console Assembly; Step5 - Pedal Assembly - Smooth Fitness SMB-XBIKE Owner's Manual

"A
I
SSEMBLY NSTRUCTIONS
S –
TEP4

Console Assembly

S –
TEP5 Pedal Assembly
NOTE: THE PEDALS ARE STAMPED, L AND
R ON THE PEDAL THREADED SHAFT.
The left and right pedals are not interchangeable.
You must only assemble the right pedal to the right
side crank arm and the left pedal to the left side
crank arm. The left and right side are determined
from the seated position. Failure to follow the
above instructions may cause damage.
1. Insert the console frame into the bike
main frame as pictured on the left.
2. Align the bolt holes in the main frame
with the bolt holes in the console frame.
3. Secure the front of the console frame to
the main frame using 2x M6*12mm
bolts(4) and 2x M6 curved washers(5).
Do not fully tighten the bolts at this time.
4. Secure the left and right sides of the
console frame to the main frame using
2x M6*12mm bolts(4) and 2x M6 flat
washers(6).
5. Fully tighten all fasteners now
L
L
9
4x #4
2x #5
2x #6
R
R