Appendix A Quick Installation - Abit AX5 Instruction Booklet

Quick Installation
Appendix A
Appendix A will give you a simplified installation procedure, in order to
allow you to install tour mainboard quickly and correctly.
If you need further information or if you need to change some other settings,
read from Chapters 1.
Installing the CPU:
CPU on the socket, and lower the lever back in position. Don' t worry, if you
don' t respect the correct orientation, you will not be able to insert the CPU.
Adjusting CPU voltage and speed:
and speed, set up the CPU in the CPU SOFT MENU™ of the BIOS SETUP.
For information about your CPU, refer to appendices B, C or D, and to
information labeled on the CPU itself.
Installing DRAM:
SIMM1 ~ SIMM4, DIMM1 ~ DIMM3 (AX5)
SIMM1 ~ SIMM2, DIMM1 ~ DIMM2 (PX5)
SIMM1 ~ SIMM4, DIMM1 ~ DIMM2 (TX5)
Since Pentium are 64-bit CPUs, you have to use two 72-pin DRAM modules, or
one 168-pin DRAM module.
Installing FDD:
with the drive to the FDD connector, and the other end of the cable to the FDC
pin connector on the mainboard.
Note: Be sure that the red line on the cable connects to the first pin of the
connectors.
Quick Installation
Lift up the lever of the CPU socket, insert your
FDC- Connect one end of the 34-pin cable that comes
According to your CPU voltage
A-1