Settings; Login - Zte MF612 User Manual

3.5g wireless router

Hide thumbs Also See for MF612:

Table of Contents

4.2 Settings

Do not change any settings unless instructed by your service provider.

To make changes to your settings you need to disconnect the router

from the network. After making changes reboot your router by turn off

and on again.

The router can be connected by RJ45 or by Wi-Fi (the SSID is

"Cellcom Router"). By either connection mode, you should set to obtain

an IP address automatically in the attribution setting of Internet

protocol(TCP/IP).

After your computer gets the IP address (like 192.168.0.101) from the

router, open a web browser and type " http://192.168.1.1" in the

address bar, and then input the username and password.

User name: admin

Password: admin

Note: some screens may be different from those shown here.

Click Login to log in the router.

Note: If you check Save after you give user name and password ,the

router will save them, next time when you want to log in the router with

Table of Contents