Zte MF612 User Manual page 31


Beacon Interval: The router broadcasts beacon message to
announce that it has buffered frames to deliver. The default value
is 100 (ms). Beacons are packets sent by an access point to
synchronize a wireless network. Specify a beacon interval value.
is recommended.

Data Beacon Rate(DTIM) : A Delivery Traffic Indication
Message(DTIM) informs next clients to listen to broadcast and
multicast messages.

Fragment Threshold: This value should remain at its default
value of 2346. If you experience a high packet error rate, you
may slightly increase your fragment threshold. Setting the
fragment threshold too low may result in poor performance.

RTS Threshold: Request To Send(RTS) threshold should be
remained as the value of 2347. If you encounter inconsistent
data flow, only minor modifications are recommended.

TX Power: Transmit power should be remained as the value of
31