Zte MF612 User Manual page 34

WEP key 2 on the client adapter, etc. A WEP is either 10 or 26
hexadecimal digits (0~9,a~f and A~F)based on whether you
select 64 bits 128 bits in the Encryption Strength drop-down list.
If the Authentication type is WPA-PSK , WPA2-PSK or WPA-
PSK/WPA2-PSK , the bottom part of the configuration page displays
WPA parameters.

WPA Algorithm: TKIP, AES or AUTO.

Pass phrase: You can input hexadecimal digits up to 64
characters or input ASCII characters choose a length of 63
characters or less.

Key Renewal Interval: Define how long the key should be renew.
You can set Wireless MAC Filtering:

Wireless Disable: If disabled, MAC address is not used to
control network access.

Wireless Allow: Set the MAC address that is allowed to access
network.

Wireless Reject: Set the MAC address that is not allowed to
access network.
Click Apply to confirm your configuration.
5. WPS
Select Wi-Fi Setting→WPS, the WPS configuration is shown in the
following figure:
34