Star Trac Pro Upright Bike Owner's Manual page 43

Installation Instructions (Cont'd)
6
7
*Save wire management for A/V install — see A/V section.
Bike, CrossTrainer and Stepper
- Put the crossbow back plate in position and insert
the two socket head cap screws by hand.
- Tighten the 2 screws into the cross bow using the
9/16" Allen wrench.
- Slide the top monitor support bracket (Gooseneck)
and lower over neck.
- Secure the gooseneck by inserting the 4 flat head
screws and tighten securely.
- Use any 4 holes to adjust TV height. See A/V install
section for more info.
9 9