Entering Display Settings Mode; Viewing And Changing Display Settings - Star Trac Upright Sport Bike Owner's Manual

P
ARAMETER
HR
Watts
Mets
Language
E D
NTERING
You must enter the Display Settings Mode within 12 seconds after the display becomes
active. If you are using the Sport Bike, or miss the 12-second window, you must stop pedal-
ing and wait for the equipment to shut down before attempting to enter the Display Settings
Mode.
1. With the display off and the equipment idle, begin pedaling. Within 12 seconds after
the display is active, press the
2. Press the E
V
IEWING AND
1. While in Display Settings mode, press the P
display setting parameters and to select the parameter you wish to view or change.
For each parameter, the current setting will be displayed in the Information
Window.
2. Press the
to set the new value.
3. Press the P
4. Press the E
return to the standard operating mode.
18 STAR TRAC SPORT BIKE O
D
ESCRIPTION
Activates and deactivates the Polar
Heart Rate function.
Enables or disables the Watts display.
Enables or disables the Mets display.
Selects the language used in the
Information Window.
S
ISPLAY ETTINGS
key to enter the Display Settings Mode.
NTER
C
HANGING
keys to scroll through the possible values for the parameter and
S key to advance to the next parameter.
ROGRAM ELECT
key to save the new settings, exit Display Settings mode, and
NTER
WNER
M
ODE
and P
, ROGRAM
D
ISPLAY
ROGRAM
' M
S ANUAL
D
EFAULT
On
Off
Off
Eng (English)
S keys simultaneously.
ELECT
S
ETTINGS
S key to scroll through the
ELECT
V
ALUE
18