CyberPower OL1000RTXL2U User Manual
Hide thumbs
Also See for OL1000RTXL2U:
- User manual (21 pages) ,
- Owner's manual (21 pages) ,
- User manual (21 pages)
Related Manuals for CyberPower OL1000RTXL2U
Summary of Contents for CyberPower OL1000RTXL2U
- Page 1 User’s Manual OL1000RTXL2U OL1500RTXL2U OL2200RTXL2U OL3000RTXL2U CyberPower Systems (USA), Inc. 4241 12th Avenue East Suite 400 Shakopee, MN 55379 Phone: 877-297-6937 Fax: 952-403-0009 www.CPSww.com K01-0000247-02...
-
Page 2: Important Safety Instructions
SUPERVISED BY PERSONNEL KNOWLEDGE OF BATTERIES AND REQUIRED PRECAUTIONS. KEEP UNAUTHORIZED CAUTION! Do not use an improper size power cord as it may cause PERSONNEL AWAY FROM BATTERIES! damage to your equipment and cause fire hazards. Copyright © 2012 CyberPower Systems, Inc. - Page 3 1K/1.5KVA or 2.2K/3KVA UPS Pan head screws: M5X12L (12) User’s manual Register card Plastic washers (8) Rackmount left rail Rackmount right rail Screw hole dust covers (10) PowerPanel® Business Edition software CD Rackmount ears (Stands) (2) Copyright © 2012 CyberPower Systems, Inc.
-
Page 4: Hardware Installation
The rails adjust to mount in 48-cm (19-inch) panel racks from 52 to 91.5cm (20.5 to 36 inches) deep. Select the proper holes in the rack for positioning the UPS in the rack. The UPS takes up position 1 through position 6. Copyright © 2012 CyberPower Systems, Inc. -
Page 5: Vertical/Tower Installation
CAUTION! Do not work alone under hazardous conditions. CAUTION! In case of the risk of electric shock, do not remove the top cover. CAUTION! The battery can energize hazardous live parts inside even when the AC input power is disconnected. Copyright © 2012 CyberPower Systems, Inc. -
Page 6: Installing Your Ups System
UPS will continuously emit two beeps per second. For resetting the unit, unplug some equipment from the outlets. Make sure your equipment carries a load current within the unit’s safe range, (refer to the technical specifications). Copyright © 2012 CyberPower Systems, Inc. -
Page 7: Basic Operation
3. Multifunction LCD Readout Shows UPS status, information, settings and events. 4. Function Buttons OL1000RTXL2U / OL1500RTXL2U / OL2200RTXL2U / OL3000RTXL2U Scroll up, scroll down, select and cancel LCD menu. 5. Input Circuit Breaker Provides input overload and fault protection. -
Page 8: Led Indicators - Ups Status
Press this button to scroll up in the LCD menu. ▼ Press this button to scroll down in the LCD menu. ENTER Press this button to select an option. Press this button to cancel or return to previous LCD menu. Copyright © 2012 CyberPower Systems, Inc. -
Page 9: Lcd Setup Functions
Date & Time Displays the present Date & Time - - - - / - - / - - - -:- - Next BAT Change Displays the next Battery Change Date & Time XXX / XXXX Copyright © 2012 CyberPower Systems, Inc. -
Page 10: Lcd Event Log
You may be prompted to save the selection, if so press the “ENTER” button to save the setting. Some options are saved and started automatically. (See the following table for additional details.) Press the “ESC” button to cancel or return to the previous LCD menu. Copyright © 2012 CyberPower Systems, Inc. - Page 11 **) This function can’t be set when Manual Bypass, Generator Mode or Converter Mode is enabled. ***) UPS has no bypass when Generator Mode is enabled. ****) UPS has no bypass when Converter Mode is enabled. This function can only be set before the UPS is on. Copyright © 2012 CyberPower Systems, Inc.
-
Page 12: Silencing Audible Alarms
The LCD screen displays the battery capacity during charging with a graphical icon while on Line Mode. Discharging Capacity The LCD screen displays the remaining battery capacity with a graphical icon while on Battery Mode. Copyright © 2012 CyberPower Systems, Inc. -
Page 13: Lcd Module Remote Control And Wall-Mounting Instructions
Step 4: Mount LCD Module on the Wall SAFETY PRECAUTIONS CAUTION! It must be done by qualified personnel. CAUTION! To avoid electric shock, turn off and unplug the unit before installing REMOTE CONTROL or WALL-MOUNTING INSTRUCTIONS. Copyright © 2012 CyberPower Systems, Inc. -
Page 14: Maintenance
Only use replacement batteries which are certified by Batteries are considered hazardous waste and must be disposed of CyberPower Systems. Use of incorrect battery type is an electrical properly. Contact your local government for more information about hazard that could lead to explosion, fire, electric shock, or short circuit. -
Page 15: Technical Specifications
L x W x H = 23.6 x 17 x 3.5in. Dimensions (43 x 43.3 x 8.8cm) (60 x 43.3 x 8.8cm) Net Weight 39.6lbs(18Kg) 68.2lbs(31Kg) Safety Conformance Approvals CE, UL *)100V are derated by 20%, 110 V are derated by 10% Copyright © 2012 CyberPower Systems, Inc. -
Page 16: Troubleshooting
Internal Fan has failed. CyberPower Systems Inc. www.cpsww.com © Entire contents copyright 2012 CyberPower Systems Inc., All rights reserved. Reproduction in whole or in part ® ® without permission is prohibited. PowerPanel Business Edition and PowerPanel Personal Edition are trademarks of CyberPower Systems Inc. -
Page 17: Product Registration
If the Product is defective in material or workmanship, CyberPower will repair or replace it at CyberPower's expense, or, if CyberPower is unable to or decides not to repair or replace the Product (if defective) within a reasonable time, CyberPower will refund to you the full purchase price you paid for the Product (purchase receipt showing price paid is required). - Page 18 (collectively, "High Risk Activities"). CyberPower expressly disclaims any express or implied warranty of fitness for High Risk Activities or with aquariums. CyberPower does not authorize use of any Product in any High Risk Activities or with Aquariums.
-
Page 19: Conformance Approvals
Cet appareil numerique de la class A respecte toutes les exigencies du Reglement sur le materiel brouilleur du Canada. This document is believed to be accurate, but CyberPower reserves the right to change or correct the contents and does not assume any responsibility for omissions or errors.