IMPORTANT SAFETY INSTRUCTIONS This manual contains important instructions. Please read and follow all instructions carefully during installation and operation of the unit. Read this manual thoroughly before attempting to unpack, install, or operate the UPS. CAUTION! The UPS must be connected to a grounded AC power CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT outlet with fuse or circuit breaker protection.
HARDWARE INSTALLATION Step 3: Rackmount rail Installation HARDWARE INSTALLATION The rails adjust to mount in 48-cm (19-inch) panel racks from 52 to These versatile UPS systems can be mounted in a rackmount or vertical 91.5cm (20.5 to 36 inches) deep. Select the proper holes in the rack for tower orientation.
Page 7
HARDWARE INSTALLATION Step 4: Adjust rackmount rails to fit your rack How to slide the UPS out from the rack Adjust the rail depth to match your rack depth. Attach the rackmount rail The UPS will be secured by a safety locking mechanism midway of to your rack with two screws and two plastic washers at the front of the pulling it out of the rack.
HARDWARE INSTALLATION VERTICAL/TOWER INSTALLATION Step 1: Adhere the rubber feet on the bottom side of base stands Adhere the protective rubber feet on the bottom side of base stands (rackmount ears) and UPS. Step 2: Attach the base stands and attach the dust covers Tighten the screws (M5X12*4pcs) of the base stands (rackmount ears) onto the bottom of the UPS.
Trouble Shooting section on page This UPS is equipped with an auto-charge feature. When the UPS is 16. If the condition persists, please contact CyberPower for technical plugged into an AC outlet, the battery will automatically charge, even support.
OPERATION INSTRUCTIONS FOR LCD MODULE LED INDICATORS – UPS STATUS LED Indicators Color UPS Status Description ON/OFF White UPS power is on. ON-LINE Green UPS is operating in Line Mode. BATTERY ON Yellow UPS is operating in Battery Mode. BYPASS Yellow UPS is operating in Bypass Mode, Manual Bypass or ECO (Economy) Mode.
LCD SETUP FUNCTIONS MULTI-FUNCTION LCD MAIN MENU Press “Enter” button to activate “MAIN MENU”. MAIN MENU submenu Function Description Information Displays the UPS information. Configure Displays the UPS settings that can be configured by the user. Displays most recent events, event count, time...
LCD SETUP FUNCTIONS LCD EVENT LOG 5 Event Logs of UPS can be recorded. Press the “ENTER” button to activate the “MAIN MENU”. Press the “▲” and “▼” buttons to scroll to the “Event Log” option. Press the “ENTER” button to select the “Event Log” submenu. Press the “▲”...
LCD SETUP FUNCTIONS SILENCING AUDIBLE ALARMS Press any of four function buttons on the LCD module; Note: the alarm can not be turned off for a “Battery Low” condition. This condition will still result in an audible alarm. Change the 'Audible Alarms' option to 'Disable' in the LCD screen and it will no long give an audible alarm for any malfunction.
LCD MODULE REMOTE CONTROL and WALL-MOUNTING INSTRUCTIONS REMOTE CONTROL WALL-MOUNTING INSTRUCTIONS Step 1: Remove the Multifunction LCD Module Step 1: Remove the Multifunction LCD Module Unscrew the right panel of the UPS. Separate the right panel from the Unscrew the right panel of the UPS. Separate the right panel from the UPS.
For battery procurement, log onto battery. Battery replacement should be performed by trained personnel www.cyberpower.com, or contact your local dealer. who are familiar with the procedures and safety precautions. Make a note of the replacement Battery tray number.
Charger Failure Charger has failed. 2. Contact CyberPower for repair. High O/P V Output voltage is too high. Low O/P V Output voltage is too low. 1. Shut down UPS and turn off input breaker.
Page 20
設備名稱:不斷電系統 ,型號 (型式) : OL3000RTXL2U,OL2200RTXL2U Equipment name Type designation (Type) 限用物質及其化學符號 Restricted substances and its chemical symbols 六價鉻 多溴聯苯 多溴二苯醚 單元 Unit 鉛 汞 鎘 Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) chromium biphenyls diphenyl ethers (PBB) (PBDE) 電路板...