Lifescan InDuo User Manual page 86

86
DISPLAY MESSAGES AND PROBLEM-SOLVING GUIDE
Why does no insulin appear when I try
to prime the InDuo™ insulin doser?
The needle may be blocked. Change
the needle and prime the InDuo™
insulin doser until insulin appears at
the needle-tip. Check that the push
button is pressed completely in and
locked. Open the slide and make sure
that Penfill is inserted correctly. If
®
Penfill ® is damaged or empty, change
it. Check that the slide is closed, and
prime the InDuo™ insulin doser until
insulin appears at the needle-tip.
Why does no insulin appear when I
prime the InDuo™ insulin doser and
the push button will not go in?
The needle may be blocked. Change
the needle and prime the InDuo™
insulin doser until insulin appears at
the needle-tip. To open the slide, dial
back to zero 0 and press the push
button completely in until it locks.
Then change Penfill
page 49.
Why does the push button not
release?
Make sure that the slide is closed
completely. The release button is
locked until the slide is closed.
How do I cancel or change the dialled
dose?
Dial back to zero 0 and press the
push button completely in. Your last
dose and the time passed since
delivery will reappear on the display.
You can increase, decrease or cancel
the dialled dose until you press the
push button. Do not change the dose
after you have pressed the push
button.
as described on
®