Lifescan InDuo User Manual page 24

Combined blood glucose monitoring and insulin dosing system

Hide thumbs Also See for InDuo:

Table of Contents

GETTING YOUR InDuo™ SYSTEM READY FOR USE

How to attach a NovoFine

• Take the protective tab off a NovoFine

• Screw the NovoFine

coded cap.

• Pull off the outer and inner needle caps before

priming the InDuo™ insulin doser.

Do not bend or damage the needle before use.

How to prime the InDuo™ insulin doser

Priming the InDuo™ insulin doser is a method of

making sure that the insulin is ready to flow when

you make your injection. Otherwise, you will not

receive the full insulin dose. You will know that the

InDuo™ insulin doser has been primed when a drop

of insulin appears at the tip of the NovoFine

æ The InDuo™ insulin doser should

always be primed:

• Before each injection.

• After changing Penfill

• After changing the NovoFine

• After opening and closing the slide on the

InDuo™ insulin doser.

needle

needle tightly onto the colour-

needle.

Table of Contents