Lifescan InDuo User Manual page 16

16
GETTING YOUR InDuo™ SYSTEM READY FOR USE
a
Before you use your InDuo™ meter to test your
blood for the first time, practise the procedure using
the control solution test. When you can do 3 tests in
a row that are within the range printed on the
OneTouch Ultra™ test strip vial, you are then ready
®
to test your blood.
How to do a control solution test
Insert OneTouch Ultra™ test strip
®
• Insert a OneTouch
end first a and facing up, into the test port. Push
the OneTouch Ultra™ test strip in firmly until it will
®
go no further.
• The InDuo™ meter will turn on automatically.
• All segments will appear briefly on the meter
display. Then the code number is displayed,
followed by the apply symbol R with the units of
measurement (Á or fi).
• Verify that the calibration code and units of
measurement are set correctly. (See pages 5 and 9
for additional information on the unit of
measurement).
® Ultra™ test strip, contact bars