Redial Last Number Called; Use Speed Call - Nortel i2004 User Manual

Make a call

Redial last number called

The Last Number Redial feature automatically redials the last dialed number.
To use Last Number Redial:
2498
or
2498
2498

Use Speed Call

By entering a one, two, or three digit code (0–999), use the Speed Call feature to
store, edit, and automatically dial frequently-called telephone numbers.
To store a Speed Call number:
SpcCtlr
SpcCtlr
32
Choose one of the following
1. To redial using the Handset:
a. Lift the Handset.
b. Press the Line
2. Without lifting the Handset, press the
Line (DN) key twice (the last number
dialed is automatically redialed).
1. Press the Speed Call Controller
The triangular icon flashes, indicating
programming mode.
2. At the prompt:
a. Enter a one-, two-, or three-digit
code (0-999), and telephone num-
ber. (internal, external, or long-dis-
tance number).
b. If required, dial the access code.
3. Press the Speed Call Controller
again to save the code and number. The
flashing icon turns off.
(DN) key.
key.
key