Use Call Waiting - Nortel i2004 User Manual

To answer a call at a specific
extension in any pickup group:
DNPickup

Use Call Waiting

Use the Call Waiting feature to alert you to an incoming call by producing a tone. It
also puts the current call on hold, while you answer the new call.
To answer an incoming call while on
another call:
CallWait
To return to the first telephone call:
or
3. Dial the pickup group number of the
ringing telephone.
1. Lift the Handset.
2. Press the DN Pickup
Pickup Directory Number FFC.
3. Dial the DN of the telephone that is
ringing (in your call pickup group).
If the pickup DN or group number is
invalid (an overflow burst tone sounds
and the screen displays Goodbye and try
again), press the
1. When the incoming call tone sounds,
press the Hold
on hold.
Note: If Automatic Hold
is not necessary to press the
2. Press the Call Waiting
1. Choose one of the following:
a. Press the Hold
ond call on hold.
b. Press the Goodbye
second call.
Incoming calls
key, or enter the
Goodbye key.
key to put a current call
is enabled, it
Hold
key.
key to put the sec-
key to end the
key.
43