Cloning And Packet Operation; Cloning; Cable Connection; Master/Slave Units - Alinco DJ-V57 Instruction Manual

144/430mhz dual band fm transceiver

Hide thumbs Also See for DJ-V57:

Table of Contents

9. Cloning and Packet Operation

9.1

The memory data and customized operational parameters can be transferred from a

Master unit to other DJ-V57 (Slave units).

• Make sure that both units are turned off before connecting the cable.

• Connect the Microphone/Speaker jack on the Master unit with the Slave unit using

an optional clone cable (EDS-11) as shown below, then turn on both units.

To the MIC/SP jack on the Master unit

* Be sure to securely screw the plug all the way down to the bottom of the jack.

Press the PTT key three times while holding down

the MONI key.

"CLONE" is displayed on the LCD.

NOTE:

This operation is required also to program the data using utility software.

9.Cloning and Packet Operation

To the MIC/SP jack on the Slave unit

Table of Contents