Assembly Instructions - Fitness Quest EASY SHAPER Owner's Manual

– C
ARE &
Caring for your Easy Shaper
Your unit has been carefully designed to require minimum maintenance.
To ensure this, we recommend that you do the following:
• Keep your unit clean by wiping sweat, dust or other residue
off with a soft, clean cloth after each use.
• Always check to be sure that the bands are secure and show no signs of wear.
• The Resistance Bands may become white after a few months of usage.
To clean, use a soft, clean cloth with a little dish washing soap.
Do not use water during cleaning.
Storing your Easy Shaper
Your unit conveniently folds down for easy storage. To fold your unit:
1
2
3
4
S
TORAGE –
5
16
Rev. 2/6/04
– A
SSEMBLY
Occasionally our products contain components that are pre-lubricated
at the factory. We recommend that you protect flooring, or anything
else the parts may contact with newspaper or cloth.
Before beginning
leg bar assembly
assembly remove
all parts from the
box. Flip the leg
pop pin
bar assembly
and place in
position as
shown here.
lift bar frame
resistance
band
bottom frame
fastener packs
bag 1
2 – 3/8" x 50 bolts
2 – wrenches
4 – washers
2 – nylon nuts
2 – long feet
4 – short feet
Rev. 2/6/04
I
NSTRUCTIONS –
foam roll
pop pin
link bar
back rest cushion
(body platform)
head
rest
cushion
head rest
frame
"U" bracket
fastener pack
bag 2
left
cover
5
resistance
band
hand grip
right
cover