3.2 Lens Installation and Adjustment
You can install either a CS‐mount or a C‐mount lens into the camera. It is recommended to use
a lens with aperture ratio of F/1.2 or lower. Please refer to the following reference steps.
CS‐Mount Lens:
1.
Remove the cover cap from the camera body.
2.
Install the lens into the camera body.
3.
Adjust the lens using the Focus / Zoom Screws.
If you are using a DC Auto Iris lens:
1.
Remove the cover cap from the camera body.
2.
Install the lens into the camera body.
3.
Connect the DC cable to the DC Auto Iris Lens Connector.
4.
When making final focus adjustment, place and hold the supplied ND filter in front of the
lens to force the lens iris to open, and then adjust the lens using the Focus / Zoom Screws.
Note: To use the ND filter, remove the protective sheets from both sides of the ND filter.
5.
Lock the Focus Screw and then remove the ND filter.
C-Mount Lens Adapter
DC Auto Iris Lens Connector
5
EQH5202 Box Camera
Focus Screw
Zoom Screw