Installation; Lens Installation And Adjustment; Top / Bottom-Mount - EverFocus EQ900F Series User Manual

3. Installation

3.1 Lens Installation and Adjustment

You can install either a CS-mount or a C-mount lens into the camera. It is recommended to use
a lens with aperture ratio of F/1.2 or lower. Please refer to the following steps.
CS-Mount Lens:
1. Remove the Cover Cap from the Camera Body.
2. Install the lens into the Camera Body.
3. Adjust the lens using the Focus / Zoom Screws.
C-Mount Lens:
1. Remove the Cover Cap from the Camera Body.
2. Install the lens into the Camera Body using the supplied C-Mount Lens Adapter.
3. Adjust the lens using the Focus / Zoom Screws.
If you are using a DC Auto Iris lens:
1. Remove the Cover Cap from the Camera Body.
2. Install the lens into the Camera Body.
3. Connect the DC Iris Cable to the DC Auto Iris Lens Connector.
Warning: Installing a C-mount lens without the C-mount lens adapter may damage the
camera sensor.

3.2 Top / Bottom-Mount

You can use a mounting bracket and screw it on the top of the Camera Body to suspend the
camera, or on the bottom of the Camera Body to support the camera.
EQ900F eZ.HD True Day/Night Box Camera
3