Table of Contents
Advertisement
Level: Press to set up the Live DPC level.
Static DPC: Turn it on to enable Static DPC.
Start: Press to start the DPC actions configured above.
Level: Press to set up the Static DPC level.
SENS‐UP: Press to increase or decrease the sensitivity.
Version
Press to display the firmware version of the camera.
5.2.7 Adjust
Enter the submenu to set up the following options:
Sharpness
Enter the submenu to set up the following options:
Sharpness: Turn it on to set up the sharpness level.
Resolution: Turn it on to automatically raise the resolution.
Monitor
Enter the submenu to fine‐tune the signal sent to the selected monitor type.
LCD: Press to set up the Gamma rate, blue gain and red gain for your LCD monitor.
CRT: Press to set up the backlight, blue gain and red gain for your CRT monitor.
OSD
Press to set up the text color or outline the text displayed on the OSD.
LSC (Lens Shading Compensation)
Turn it on to correct the phenomenon where the image gets darkened or blurred on the
periphery.
16
EQH5202 Box Camera
Advertisement
Table of Contents
