White Balance - EverFocus EQH5202 User Manual

• HSBLC (Highlight Suppression BLC):
Select – Select an area block to set up the HSBLC value. The area block will start

flashing when you select it. Four area blocks are available.
Display – Select OFF to disable the HSBLC function, or select ON to enable the HSBLC

function and for further setup. After selecting an area block, enter the Display setup
page, a "POSITION" sign displayed on the screen. Use the direction buttons to move
the area to the desired position. Press the Enter / Confirm button to confirm the
position, a "SIZE" sign displayed on the screen. Use the direction buttons to adjust the
size for the area. Press the Enter / Confirm button to confirm the size, the Return /
Again buttons displayed on the screen. Select Again to set up the position and size for
the area again or click Return to return to the BLC setup page.
Level – Increase or decrease the HSBLC value for all area blocks. The lower the value,

the more intense the HSBLC.
Mode – Choose between ALL DAY mode and NIGHT (only) mode. NIGHT mode will

activate HSBLC only when light levels fall to levels associated with nighttime.
Black Mask – Turn on or off the black masking effect.

Default –Return to the default setting.


5.2.3 White Balance

The screen color can be adjusted by using the White Balance function. The options include ATW
(Auto Trace White Balance), AWCSET, Indoor, Outdoor and Manual.
ATW (Auto Trace White Balance)
This mode can be used to view areas with a color temperature ranged from 1800°K to 10500°K
(e.g., around fluorescent lights, outdoors, around sodium vapor lamps or inside tunnels).
AWC  SET
Select this to allow the camera to automatically adjust the white balance under all conditions.
11
EQH5202 Box Camera