Advertisement
3. Installation
3.1 Installation and Adjustment
1.
Loosen the lock screw using the supplied hexagon wrench (Fig.1) and remove the top
cover by rotating counter-clockwise (Fig.2).
2.
A. Flush Mounting: Drill the big hole (Φ56mm) on the position where you want to install
the camera, then put the body into the hole and secure the camera using the supplied
four mounting screws.
B. Surface Mounting: the bottom bracket is necessary for surface mounting, please follow
the steps as below:
EMB935F Outdoor Mobile IR Mini Dome Camera
6
Advertisement
