Dell Openmanage Client Instrumentation; Chassis Intrusion Detection; Option Settings; Padlock Ring And Security Cable Slot - Dell Precision Workstation 690 User Manual

Dell OpenManage Client Instrumentation

Dell OpenManage Client Instrumentation is software that enables remote management programs such as IT Assistant to do the following:
Access information about your computer, such as how many processors it has and what operating system it is running
l
Monitor the status of your computer, such as listening for thermal alerts from temperature probes or hard-drive failure alerts from storage devices
l
Change the state of your computer, such as updating its BIOS or shutting it down remotely
l
A managed system is one that has Dell OpenManage Client Instrumentation set up on a network that uses IT Assistant. For information about Dell
OpenManage Client Instrumentation, see the Dell OpenManage Client Instrumentation User's Guide available on the Dell Support website at support.dell.com.
Security

Chassis Intrusion Detection

NOTE: When the administrator password is enabled, you must know the administrator password before you can reset the Chassis Intrusion setting.
This feature, if installed and enabled, alerts the user if the chassis has been opened. To change the Chassis Intrusion setting:
1. Enter system setup.
2. Press the down-arrow keys to move to the Security option.
3. Press <Enter> to access the menu.
4. Use the down-arrow key to select Chassis Intrusion.
5. Use the left- and right-arrow keys to select an option setting.
6. Exit system setup.

Option Settings

On — If the computer cover is opened, the setting changes to Detected, and the following alert message displays during the boot routine at the next
l
computer start-up:
Alert! Cover was previously removed.
On-Silent (default) — If the computer cover is opened, the setting changes to Detected. No alert message appears during the boot sequence at the
l
next computer start-up.
Off — No intrusion monitoring occurs and no messages appear.
l
To reset the Detected setting:
1. Enter system setup.
2. Press the down-arrow keys to move to the Security option.
3. Press <Enter> to access the menu.
4. Use the down-arrow key to select Intrusion Alert.
5. Use the left- and right-arrow keys to select Acknowledge.
6. Restart the computer to implement your changes.

Padlock Ring and Security Cable Slot

Use one of the following methods to secure your computer:
Use a padlock alone or a padlock and looped security cable with the padlock ring.
l
A padlock alone prevents the computer from being opened.