Resetting The Chassis Intrusion Detector - Dell Precision Workstation 690 User Manual

2. Replace the computer cover (see
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
3. Connect your computer and devices to electrical outlets, and turn them on.
Resetting the Chassis Intrusion Detector
1. Turn on (or restart) your computer.
2. When the blue DELL™ logo appears, press <F2> immediately.
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. Then shut down your
computer and try again (see
3. Enter system setup, select the Intrusion Alert option, acknowledge the alert and then press the left- or right-arrow key to select Reset. Change the
setting to On, On-Silent, or Disabled.
NOTE: The default setting is On-Silent.
4. Restart the computer to implement your changes.
Back to Contents Page
Replacing the Computer Cover).
Turning Off Your Computer).