Variable Speed Fan; Boxed Processor Fan Heatsink Set Points - Intel Core i7-800 Specifications

Desktop processor series and lga1156 socket thermal/mechanical specifications and design guidelines
Table of Contents

Advertisement

Boxed Processor Specifications
10.4.2

Variable Speed Fan

If the boxed processor fan heatsink 4-pin connector is connected to a 3-pin
motherboard header, it will operate as follows:
The boxed processor fan will operate at different speeds over a short range of internal
chassis temperatures. This allows the processor fan to operate at a lower speed and
noise level, while internal chassis temperatures are low. If internal chassis temperature
increases beyond a lower set point, the fan speed will rise linearly with the internal
temperature until the higher set point is reached. At that point, the fan speed is at its
maximum. As fan speed increases, so do fan noise levels. Systems should be designed
to provide adequate air around the boxed processor fan heatsink that remains cooler
then lower set point. These set points, represented in
vary by a few degrees from fan heatsink to fan heatsink. The internal chassis
temperature should be kept below 40 ºC. Meeting the processor's temperature
specification (see
The motherboard must supply a constant +12 V to the processor's power header to
ensure proper operation of the variable speed fan for the boxed processor. Refer to
Table 10-1
Figure 10-9. Boxed Processor Fan Heatsink Set Points
Table 10-2. Fan Heatsink Set Points
Boxed Processor Fan
Heatsink Set Point
(
X ≤ 30
Y = 35
Z ≥ 40
Note:
1.
Set point variance is approximately ± 1 °C from fan heatsink to fan heatsink.
Thermal/Mechanical Specifications and Design Guidelines
Chapter
6) is the responsibility of the system integrator.
for the specific requirements.
º
C)
When the internal chassis temperature is below or equal to this set point,
the fan operates at its lowest speed. Recommended maximum internal
chassis temperature for nominal operating environment.
When the internal chassis temperature is at this point, the fan operates
between its lowest and highest speeds. Recommended maximum internal
chassis temperature for worst-case operating environment.
When the internal chassis temperature is above or equal to this set point,
the fan operates at its highest speed.
Figure 10-9
Boxed Processor Fan Speed
and
Table
10-2, can
Notes
1
-
-
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Core i5-700

Table of Contents