Important Notes - Jensen JIMS-285 Owner's Manual

ON PLACEMENT
• Do not use the unit in places which are extremely hot
• Place the unit on a flat and even surface.
• Do not restrict the air-flow of the unit by placing it in a place with poor ventilation, by covering it
with a cloth or by placing it on a carpet.
ON CONDENSATION
• When left in a heated room where it is warm and damp, water droplets or condensation may form
inside the unit.
• When there is condensation inside the unit, the unit may not function normally. Let it stand for 1 to
2 hours before turning the power on, or gradually heat the room up and dry the unit before use.
Should any trouble occur, remove the power source and refer servicing to qualified personnel.
PRECAUTION FOR USE
• UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
• DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS
VOLTAGE AND ALL OTHER CONNECTIONS HAVE BEEN MADE.
• DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF
SEVERAL CENTIMETERS AROUND THE UNIT FOR VENTILATION.
• ALWAYS HOLD THE BASE OF MAIN UNIT WHEN RELOCATION THIS SYSTEM TO
AVOID DAMAGE THE MOTORIZED CD DOOR.

IMPORTANT NOTES

Avoid installing the unit in locations described below:
• Places exposed to direct sunlight or close to heat radiating appliances such as electric
heaters.
• Places subject to constant vibration.
• Dusty, humid or moist places.
cold, dusty or humid.
,
6