Getting Started - Jensen JIMS-285 Owner's Manual

DISPLAY SECTION
1. iPod Mode Indicator
2. TUNER(Radio) Mode Indicator
3. CD Mode Indicator
4. AUX Mode Indicator
5. MP3 Indicator
6. WMA indicator
7. Snooze Indicator
8. Sleep Indicator
9. Clock Display
10. CD Playback Indicator
11. Repeat Indicator
12. Folder Repeat Indicator
13. Memory Indicator
14. Random Play Indicator
15. Alarm 1 / 2 Indicator
16. ID3 Indicator
17. AM/FM Band Indicator
18. FM Stereo Indicator
19. Multi Function Display
20. Buzzer Alarm Indicator

GETTING STARTED

SPEAKER CONNECTION
Place one speaker on the left side of the main unit and connect the speaker wire to the speaker
connector "L" located on the left hand side of the main unit. Place the other speaker on the right
side of the main unit and connect the speaker wire to the speaker connector "R" located on the left
hand side of the main unit.
ANTENNA CONNECTION
FM: Untie and fully extend the FM Antenna wire for best reception.
AM: Plug in the AM loop antenna into AM antenna socket located on the left hand side of the main
unit.
POWER SUPPLY
This Micro System operates on 120V AC~ 60Hz line power supply.
The remote control unit operates on a 'CR2032" lithium battery (Included).
AC POWER CONNECTION
Connect the power cord to an AC 120V AC~ 60Hz power source.
Remarks:
In case of malfunction due to electrostatic discharge (ESD), reset the unit by disconnecting and
reconnecting the AC CORD to reset and to resume normal operation.
10