Nautilus Quinton Owner's Manual page 10

®
8
C H A N G I N G T H E G A M E I N H E A LT H A N D F I T N E S S
INSTALLATION & OPERATION
[ENTER] to select OFF.
3. The display will show UPDATING for a few seconds, then display the
OFF setting.
4. Next, turn off the power to the treadmill from the circuit breaker switch. The
circuit breaker switch is located on the bottom front panel of the treadmill.
5. With the power to the treadmill off, remove the magnet key. Then, turn the
power to the treadmill back ON at the circuit breaker switch.
6. The display will show the SELECT WORKOUT screen. The limited access
control remains inactive, granting unrestricted access, until you turn the
magnetic key option back on, or place the magnet back in its designated area.

IMPORTANT
SAFETY CORD FEATURE REACTIVATES AUTOMATICALLY and must be turned
off again using the above steps.
If at any time the safety key is put back in place THE
Emergency
Stop
Magnet
®