Fixture Connection - Chauvet COLORdash Batten User Manual

Fixture Connection

The fixture may be stacked together horizontally to create a strip light or vertically
for a blinder effect. This can be used for runway lighting or cycloramas. With the
different methods of bracket mounting, this turns this fixture into a very versatile
lighting tool.
Please follow the below instructions for stacking the fixtures horizontally.
COLORdash™ Batten User Manual
Note: In this configuration, it is only recommended that a maximum of 3 fixtures be
stacked together at a time.
Note: You will still need to connect and configure each fixture separately. For the power,
you may use the linking cables provided with the fixture.
1. Remove the brackets that come with the fixtures, in order to make room for
the attachment screws.
2. In the same location where the bracket attaches, you may install the linking
screws. This will attach the fixtures close together.
3. You may use the brackets for this configuration, or simply install the clamp
directly to the fixture as showed on the previous page.
10
9/5/2008 9:49 AM