Error Messages - Chamberlain Icon26 series Owner's Manual

OUT OF RANGE CODES: If the processor detects one
or more 3-digit codes present on the memory card
inserted that cannot be accessed, an error message is
displayed. (fig a.) Codes that cannot be accessed by
the limitation of the system being used cannot be
edited.
LOW BATTERY If the battery backup is reaching it's
minimal charge level, a battery icon with a "B" next to
it will display in the top right corner of the
display. (fig b.) An alert beep will accompany this
icon. The batteries must be charged to continue.*
If the battery backup level reaches it's minimal charge,
an error message will display (fig c.) and the system
will become non-functional until the battery backup is
charged by using the plug in transformer.*
LOW BATTERY ICONS: If a battery icon appears in
the top right corner of the display and the letter next
to it is an "M" or a "C", as shown in (fig d.) and (fig
e.), contact Manufacturer for instructions.
*IMPORTANT NOTE: In order to charge the battery in the Dial Code System, the processor MUST be plugged in to the
transformer and the processor MUST BE ON. If the power is off on the processor, the battery will not be charging.

ERROR MESSAGES

Codes Detected out
of Range, See Manual
It Must Be Recharged
Icon Page
36
WELCOME
Battery Is Low
WELCOME
WELCOME
(fig a.)
B
(fig b.)
(fig c.)
C
(fig d.)
M
(fig e.)