Resident Information - Chamberlain Icon26 series Owner's Manual

1
In the Program Selection Screen (fig a.), Press the
STEP
SELECT PROG MODE:
(N)Names (U)Utility
2
STEP You now have three options:
To program by name, press
N
the key and the first
empty code will display.
3
Type in the desired Resident name, LAST name first, followed by the first name (fig c.). If the code you have
STEP
selected is already used, there will be a name already. You can edit the name by simply typing over it.
Press the
within a code.
Resident code
005 LastNAME,First
Jones, Robert_
Resident name
4
Type in the desired Resident phone number (fig d.). If you need to enter an area code refer to the area code page.
STEP
Press the
5
An individual six digit Resident Key code may be
STEP
assigned to each resident . Residents can use
their Key Code to access the premises.
Assignment of Resident Key Codes is optional. The first three digits of the Key Code is the assigned Directory
Code. Assign the last three digits (numeric characters only) to create an individual Key Code. If using the RF
Card, proceed to Step 6 (fig e.). Press the

RESIDENT INFORMATION

(fig a.)
To program by code, enter
OR
a three digit code* and press
the
*
The unit will only accept codes within it's
range - depending on memory capacity.
key to complete the entry. You may also use the
(example - fig c.)
key to complete the entry. The "KEY CODE" screen will be displayed. (fig e.)
Icon Page
25
N
key. The screen will display (fig b.):
PROG A NEW NAME
PROG BY CODE:___
To view or edit an existing name
OR
or code, use the
key. keys to scroll through Directory.
005 PHONE NUMBER:
_-___-496-2634
005 KEY CODE:
005123
key.
N
(fig b.)
keys to move the cursor
(example - fig d.)
(example - fig e.)