Table of Contents
Advertisement
Setting Priority Channels
1. To assign the current channel to a Priority Channel flag, press and
hold the A button.
A small P icon appears on the upper right corner of the display.
2. To remove the current channel from a Priority Channel flag, press and
hold the A button.
The small P icon disappears from the upper right corner of the display.
Selecting PL/DPL Code
Ensure that both stations select the same tone or code to use the
CTCSS or DCS system.
1. To enable CTCSS or DCS system selection, press and hold the D
button.
Select CTCSS system for a continuous, subaudible tone on your
transmitted audio. Select DCS system for a digital code on your
transmitted audio.
2. Press and hold the Side-D button.
The screen displays rPL OFF.
3. Press and hold the Side-D button again.
The screen displays tPL OFF.
4. To select the desired subaudible tone or digital code, rotate the
Channel Selector knob.
5. To activate, press any button, except the Emergency Alarm button.
The PL or DPL icon appears on the screen. If DPL is displayed, DCS
system is activated. If PL is displayed, CTCSS system is activated.
Note: The CTCSS and DCS systems are not available on
CB-05, CB-05R, and CB-35 channels because these are
Emergency channels.
Activating User Mode
1. Press and hold Side-2 button.
2. To select the function that you want to adjust, short press the A or B
button.
3. To adjust the setting parameters, short press the Side-2 or Side-3
button.
4. To save the new setting, restart the radio.
User Menu Mode
User menu mode allows you to define or configure various settings. For
more information, consult your authorized Motorola Solutions dealer.
Table 6: User Menu
Function
Parameter
SQL-X
SQL-0~SQL-5
SCTYPE-X
SCTYPE-1
SCTYPE-2
SCTYPE-3
MICGN-X
MICGN-1
MICGN-5
MICGN-9
SCTONE-X
SCTONE-0~SCTONE-5
English
19
Advertisement
Table of Contents
