Elastomers And Suspension - Invacare top end terminator series User Manual

®
Top End Terminator™Series
– Detail view from rear of wheelchair.
62

5.18 Elastomers and Suspension

WARNING!
– After any adjustments, repair or service and before
use, make sure all attaching hardware is tightened
securely. Otherwise injury or damage may occur.
– The performance of the wheelchair will be affected
if elastomers are not the same on both sides of the
wheelchair.
Replacing Rear Elastomers
Outside of
Wheel-
chair
Frame
Use an allen wrench to hold the outer allen screw A.
1.
2. While holding the outer allen screw A in position, remove the
inner allen screw B from the pivot pin C.
3. Use the allen wrench to push the pivot pin C with outer allen
screw A out of the mounting hole D.
4. Remove the existing elastomer E.
Inside of
Wheelchair
Frame
1171801-A