Invacare top end terminator series User Manual page 38

®
Top End Terminator™Series
3. Determine difference between two measurements. If difference
between the two measurements is greater than 1/2-inch (1.27
cm) (0 + 1/4-inch (0.63 cm) for maximum rollability), one of two
conditions exists:
•
If the back centerline measurement of the rear wheels is
SMALLER B than the front centerline measurement of the
rear wheels, a TOE-OUT condition C exists.
Top View of
Wheelchair
38
•
If the back centerline measurement of the rear wheels is
LARGER D than the front centerline measurement of the
rear wheels, a TOE-IN condition E exists.
4. If the difference between the measurements is greater than
1/2-inch (1.27 cm), correct the toe-in/toe-out condition.
Top View of
Wheelchair
1171801-A