Invacare top end terminator series User Manual page 40

®
Top End Terminator™Series
– When positioning the other adjustment ring B, rotate
the ring until the stop C is at the bottom of the slot
in the camber clamp A. The right and left stops C
MUST be positioned opposite to each other or Fine
Adjustment on page will not work correctly.
– When the left adjustment ring B is adjusted to a
camber, the right adjustment ring B will not touch the
camber clamp A and when the right adjustment ring
B is adjusted to the other camber the left adjustment
ring B will not touch the camber clamp A.
Stop-Not touching camber
clamp
40
Stop-In position for one camber,
touching camber clamp.
Stop-In position for one camber,
touching camber clamp.
Fine Adjustment
1. Open the camber clamp.
Slowly rotate the axle tube A until the stop on the opposite
2.
adjustment ring is positioned at the opposite end of the camber
clamp.
3. Close the camber clamp.
Stop-Not touching camber
clamp.
1171801-A