Settings; Sport Profile Settings; Running Settings; Cycling Settings - Polar Electro RC3 GPS User Manual

8. SETTINGS

Sport Profile Settings

Adjust the settings for the sport profiles to suit your training needs in
You can, for example, activate the sensors you want to use in different sports. When you start a training
session using the sport profile, the training computer detects the needed sensors automatically.
There are four sport profiles shown in the pre-training mode by default:
and
sport 1 Other sport 2
default. You can set Cycling (Bike 2)
The heart rate sensor is on by default in every sport, and the training computer automatically starts searching for
the heart rate sensor signal once you press
heart rate sensor, turn it off in

Running Settings

To view or modify sport profile settings for running, select
• : Select
Training sounds
• : Select
Heart rate sensor
• : Select or .
GPS On Off
• : Select
Stride sensor
also visible.
•
Stride sensor calibration
calibration, see Calibrate the Polar s3+ Stride Sensor (page 39).
Stride sensor calibration is visible only if the stride sensor has been set on previously.
• : Select
Speed View Kilometers per hour
select
Miles per hour
• : Select
Automatic lap
Set the distance in kilometers or miles.
•
Show in pre-training mode?
press START in time mode, the sport will be visible in the list of sports in pre-training mode. Select
and
Sport not shown in pre-training mode
•
Training view numbering
training view appears for a few seconds when you browse the training views with UP/DOWN.
• : Select
Training view 3 rows
according to your selection.
All new sensors must be paired with the training computer before they can be activated.
For more information on pairing a new sensor with the training computer, see New Accessory (page 38).

Cycling Settings

To view or modify sport profile settings for cycling, select
/
(Bike1) Cycling2 (Bike 2)
• : Select
Training sounds
• : Select
Heart rate sensor
• : Select or .
GPS On Off
• For more information, see Bike Settings.
Bike 1 settings
• : Select
Speed View Kilometers per hour
. The fifth sport profile,
to be shown in the pre-training mode in Cycling Settings.
START
> >
MENU Settings
, , or
Off Soft Loud Very loud
, or
On Off Search new
or . If you have already paired one stride sensor, the option
Off Search new
: Select >
Calibrate By running
or
Minutes per kilometer
or .
Minutes per mile
or . If you set the automatic lap
On Off
Select , and
YES Sport shown in pre-training mode
is displayed.
: Select or . If you set the
On Off
or . The training information will be displayed on three or two rows
2 rows
, , or
Off Soft Loud Very loud
, or
On Off Search new
or
Minutes per kilometer
MENU
Running
, is not show in the pre-training mode by
Cycling (Bike 2)
in time mode. If you bought a set which does not include a
> >
Sport Profiles Sport
> >
MENU Settings
.
.
or . For more information on
Set factor
. If you have chosen imperial unit,
,
On Set automatic lap distance
Training view numbering On
> >
MENU Settings
.
.
. If you have chosen imperial unit,
> >
Settings Sport Profiles
, ,
Cycling (Bike 1) Other
>
Heart rate sensor Off
>
Sport profiles Running
On
is displayed.
is displayed. When you
, the number of the
>
Sport profiles Cycling
Settings
ENGLISH
.
.
is
No
29