Polar Electro RC3 GPS User Manual page 30

ENGLISH
select
Miles per hour
• is set off as default. Press START and
Automatic lap
kilometers or in miles and confirm with START .
can select to have the Automatic lap
•
Show in pre-training mode?
press START in time mode, the sport will be visible in the list of sports in pre-training mode. Select
and
Sport not shown in pre-training mode
•
Training view numbering
training view appears for a few seconds when you browse the training views with UP/DOWN.
• : Select
Training view 3 rows
according to your selection.
Bike Settings
To view or modify bike settings, select
> /
Bike 1 settings Bike 2 settings
• : Select
Speed sensor
also visible.
• : Set the wheel size to xxxx mm. For more information on measuring the wheel size, see
Wheel size
Measuring Wheel Size.
• Cadence sensor : Select
is also visible.
• : Set or
Autostart Off On
Autostart on is displayed. If you have not paired a speed sensor with your training computer,
sensor for bike required
. If you select
settings
All new sensors must be paired with the training computer before they can be activated.
For more information on pairing a new sensor to the training computer, see New Accessory (page 38).
Measuring Wheel Size
Select > >
MENU Settings
size > Set wheel size
Wheel size settings are a prerequisite for correct cycling information. There are two ways of determining
the wheel size of your bike:
Method 1
Look for the diameter in inches or in ETRTO printed on the wheel. Match it to the wheel size in
millimeters in the right column of the chart.
ETRTO
25-559
23-571
35-559
37-622
47-559
20-622
52-559
23-622
30 Settings
or .
Minutes per mile
or .
Off On
Select , and
YES Sport shown in pre-training mode
is displayed.
: Select or . If you set the
On Off
or . The training information will be displayed on three or two rows
2 rows
>
MENU Settings
or . If you have already paired one speed sensor, the option
Off Search new
Off or Search new . If you have already paired one cadence sensor, the option
. If you select ,
On Activate speed sensor YES/NO
is displayed and the training computer returns to
,
NO Activation canceled
>
Sport profiles Cycling (Bike 1)/Cycling 2 (Bike 2)
Wheel size diameter (inches)
26 x 1.0
650 x 23C
26 x 1.50
700 x 35C
26 x 1.95
700 x 20C
26 x 2.0
700 x 23C
is displayed. Set the distance in
Set distance
Automatic lap set to x.x km
Training view numbering On
> >
Sport profiles
is displayed.
is displayed. After this, you
is displayed. When you
, the number of the
/
Cycling (Bike1) Cycling2 (Bike 2)
On
is displayed. Select
YES
Speed
/
Bike 1 settings Bike 2
> >
Bike 1 settings Wheel
Wheel size setting (mm)
1884
1909
1947
1958
2022
2051
2054
2070
No
is
On
and